SPECIFICATIONS

Average Life (hrs): 50000Hrs

Brand Name: AIMENGTE

Certification: ce,ROHS,UL,CE,RoHs

Choice: yes

Color Temp(K): 3000k/4000k/6000k

High-concerned chemical: None

Is Batteries Included: Yes

Is Smart Device: No

Item Type: Strip

LED Chip Brand: AIMENGTE

LED Chip Model: SMD2835

LEDs Number/M: 280

Luminous Flux: 249-2000

Model Number: solid cob neon led strip light

Nominal Voltage: 24V

Occasion: Living room

Origin: Mainland China

Power Consumption (W/m): 7.36W/m

Power Generation: Motion

Power Source: DC

Specifications (light beads / m): 280

Strip type: COB

Voltage: 24v

Waterproof: Yes

NEW 10M 5M Set Solid COB Neon LED Strip Light Pure Silicone Gel Tube With Wireless PIR Motion Sensor Switch For Stairs Corridor

NOTE:

1. The sensor will also work at daylight

2. When the sensor power is too low it will not work properly, please charge it in time !!

3. One receiving host can be equipped with up to 7 wireless sensor switches at most.

4. One wireless sensor switch can be equipped with up to 100 receiving hosts at most.

Specifications:

Product Name: Wireless PIR Motion Sensor COB Neon Strip (The Sensor Build-in 450mA Battery)

Main Material: 100% Pure Silicone Gel Tube

Strip Width: 10MM (PCB Width 5MM)

Output Voltages: DC24V

Input Voltages: AC110V/ AC220V

Lighting Color: Cold White(5500K-6500K)/ Natural White(4000K-5000K)/ Warm White(2800K-3500K)

Wireless Sensor Detection Range: 1-3M

Receiving Host Induction Distance:<=10M (Distance from Wireless Sensor Switch to Receiver)

Features:

The Under Cabinet LED Strip Lights are an excellent addition to your home or office lighting setup. These versatile lights making them perfect for use in your kitchen, pantry, bedroom, wardrobe, or closet. With Portable PIR motion sensor, you can control the lights without ever having to touch them, And it more flexible to stick anywhere you like, simple and easy to install

Using:

1. Connect the 24V power supply to the receiving host and led strip

2. When the "receiving host" is powered on, within 8 seconds, press and hold the code matching key on the back of the "wireless sensor switch" until the output LED light strip flashes once, and the pairing is completed.

3. If the "receiving host" is powered on, after 8 seconds, first press the code matching key on the "receiving host", then press and hold the pair code key on the back of the "wireless sensor switch" until the LED light strip flashes once, and the pairing is completed.

4. Repeat the above steps when connect the second or more wireless sensor switches